Building model…
primitivecalibrationtestbeginner
Calibration cube
The 20 mm cube, with a chamfered base to stop elephant's foot.
Print it, measure all three axes with calipers, and correct your steps. The 0.6 mm base chamfer keeps the first layer from widening the measurement.
- Built from
- Extruded outline
- Modifiers
- 0
- Units
- Millimetres
The STL is compiled when you ask for it, from the document above — so anything you change in the editor comes out of the same endpoint, watertight and ready to slice.
Printing this
1
Open or download
Press Use this to load the template into the editor, or take the STL as it stands and slice it.
2
Change what matters
Every dimension is still a parameter: wall thickness, height, segment counts, fonts and modifiers are all editable, and the preview recompiles as you type.
3
Slice and print
Models are closed solids with printable wall thicknesses, so a standard 0.2 mm profile is usually all a slicer needs.