Building model…
revolvecuptumblerbeginner
Everyday tumbler
A straight-sided cup with a 2.4 mm wall and a flat base.
The simplest useful vessel there is: near-vertical walls, a solid base and no overhang at all. Print it in PETG if it is going to hold anything warm.
- Built from
- Revolved profile
- Modifiers
- 0
- Units
- Millimetres
The STL is compiled when you ask for it, from the document above — so anything you change in the editor comes out of the same endpoint, watertight and ready to slice.
Printing this
1
Open or download
Press Use this to load the template into the editor, or take the STL as it stands and slice it.
2
Change what matters
Every dimension is still a parameter: wall thickness, height, segment counts, fonts and modifiers are all editable, and the preview recompiles as you type.
3
Slice and print
Models are closed solids with printable wall thicknesses, so a standard 0.2 mm profile is usually all a slicer needs.